The sphere of industrial use is also very wide and the application here of the elastic rubber capabilities may be highly worthwhile. The ELTEC membranes and belts in the FS700 or GR850FS (GR900FS, GR950FS) quality have been very successfully used as a subgrade, dilatation or simply parting layer between the source of vibrations (noise) and the surrounding constructions, namely the equipment. In addition, the FS700GR or the FS700 plates or membranes are suitable regarding their noise damping capabilities. The ELTEC elastic GR900FS, GR850FS, FS700GR and FS700 plates or belts have been widely used in industry, transport and civil engineering as vibration suppression materials (for example, in the foundations of machines buildings, rails, distant belts, antiskid belts, etc). They may be delivered according to the customer’s technical requirements in the dimensions of 2000x1000 mm (or in smaller cut sizes based on order) and with a thickness range of 4-60 mm. 

The actual procedure of laying the materials depends on the nature of the application in question. However, it must always be taken into consideration that the rubber membranes of any hardness and sturdiness will always require a firm bedding, in that they create an insulation layer in connection with their resistance. They may be joined by adhesive bonding or mechanically affixed on the structures, laid free (e.g. horizontal vibration isolation pads for machines and equipment), or they can be imbedded, poured out with new concrete (static insulations of constructions, beams, pillars, roads, concrete footing for mounting of industrial machines, etc). Moreover, it is important to know that the rubber membranes and belts may also be cut directly on the spot, separated or processed in other ways. The straight-blade or manually rotating knives (tooth-free) are the most suitable cutting tools for this purpose.

USM vibration absorbing mats

 ELTEC FS elastic highly tenacious plates

Products with similar capabilities as the above-mentioned groups, but being extremely tenacious, very resistant to abrasion and to the impact of the environment. They are frequently used in traffic situations and construction of transport roads. They are ideal for bedding of heavy machinery for their anchoring and for control of vibrations.  The products are also have an enormous load-carrying capacity.

Elastic plates and HVD rigid belts 

These are very rigid components with an increased PU content. Suitable for application of a higher percentage of dust fractions and decrease in the roughness ratio, the plates present enormous consistency and are impermeable to water. 

Classical granulate plates connected by polyurethane (PU) with very high damping parameters as given in the attestations, provide a final damping effect in direct proportion to the material strength. The USM system is frequently also used in the sphere of bedding for under-gravel mats and for under-concrete for absorbing the actions of vibration.

ELTEC Elastic damping plates

These are very tenacious plates developed in particular for damping vibration, noise, or of even loads, without significant actions and variations, and providing long material durability . Indeed, their properties do not change even if under extreme conditions (humidity, temperature, dustiness, etc). The plates are also ideal for application in civil engineering, prefabricated elements, cable distribution systems and pipe sleeves. They are optimal for use in industrial constructions as cladding, tiling, and for handling and manufacturing floors, etc.

Use:

Suitable for the use in building and industry, for the attenuation of noise, vibrations and in case of load; Often used in industrial buildings as production floor, protectors and cable lintels
 

Features:

GR 850 FS	Elastic filler blocks GR 850FS Produced in dimensions 2000x1000mm; If required, the material can be prepared in a desired dimension
EDPM colour	The standard coloured version is green, red and black; If required, EPDM version can be supplied

High tough elastic parts

Volume weight	650 - 900 kg/m3
Width	4-60 mm
Dimension	2000x1000 mm

Note.

The products may already be produced in a thickness range of 4-80 mm. Our technology allows us to separate the materials in horizontal shapes to meet the customer’s needs.

GR 850 FS

Structure 1:1

Use:

Suitable for the use in building and industry; Frequently used in transport and building of transport roads including of bridge constructions Ideal for heavy machinery when anchoring and vibration reduction; Boards have an extreme loading limit
 

Features:

FS 700	FS 700 Elastic filler blocks Produced in dimension 2000x1000mm, if required, material can be prepared in a desired dimension
EDPM colour	The standard coloured version is green, red and black; If required, EPDM version can be supplied

High tough elastic parts

Volume weight	350-110 kg/m³
Width	4-60 mm
Dimension	2000x1000mm

Note.  Dimensions may be adjusted if required by the customer

Products are manufactured from recycled materials and are eco-friendly.

 

FS 700

Struktura 1:1

Use:

Suitable for the use in building, industry and transport; Often used in the area of rubber mats and rubber filling of impact vibrations.  

Features:

FS 700	USM Anti-vibration mats Produced in dimensions 2000x1000mm, in black colour
EDPM colour	The standard coloured version is green, red and black; If required, EPDM version can be supplied

Anti-vibration mats

Volume weight	550-700kg/m³
Width	10-60mm
Dimension	2000x1000mm

Note.  Dimensions may be adjusted if required by the customer

Products are manufactured from recycled materials and are eco-friendly.

USM	Structure  1:1